Matériel de béton neuf SID BETONMISCHER AMR MINI / CONCRETE MIXER 960 MM, 0,2 M3

The AMR Mini concrete mixer can be used at the construction site, for hardening and renovation of pavements, water channels and sewers.

Recommended especially on construction sites with limited or no access to electricity. Before direct use, the required amount of material can be mixed and transported to any place. The AMR Mini concrete mixer is hydraulically driven from the installation on the machine arm.

Advantages:

Bucket concrete mixer allows to minimize the cost of concrete production practically to the cost of raw materials: aggregate, water and cement.

The concrete mixer is equipped with a safety hatch with teeth for ripping the bags.

The grille protects the mixer against stones and other impurities that may damage or block the impeller.

The mixer has a forward blade lower section for easier picking up of gravel straight from the heap.

It can be mounted on mini loaders, loaders, backhoe loaders, telescopic loaders and agricultural tractors.

Dry blending possible.

Description:

- The concrete mixer is made of S355 steel with a thickness of 5 mm.

- Screwed paddle stirrer.

- Pipe fi 70 mm, removable, screwed.

- Driven by a hydraulic motor 250cm3 / rev.

- Power transmission via Berma bevel reduction gear.

- Screw mounting.

- Side discharge opened manually.

- It is possible to produce the mixer with dimensions according to customer needs.

- Warranty 12 months

Width | Volume| Weight | Price*

960 mm | 0,2 m3 | 250 kg | 3 265 €

1210 mm | 0,3 m3 | 275 kg | 3 415 €

1460 mm | 0,4 m3 | 340 kg | 3 565 €

• Price without screwed on fixing - TYPE WD

Additional options:

• Insert S355 - 255 € net

• Hardox insert - 460 € net

• Lower drain hydr. - 560 € net

• Hydr. Opening Bars - 560 € net

• Spiral mixer - 185 € net

• Downspout - 130 € net